le 26.05.2019 14:39
le 26.05.2019 14:39
ive been having abit of trouble and dont know too much im affarid, ive got a Erazer X5361 G with i think a B250H4-EM mother board, i see what looks like the right M.2 connection plug but the samsung drivers dont detect it and neither does my bois by the looks of it. any ideas on how i can get it to work. thanks
le 30.05.2019 09:22
le 30.05.2019 09:22
Okay everyone, I got it sorted, had to remove my old HDD, swap bois from RST to AHCI disable CSM. Change boot to USB and install a fresh windows 10 off a stick. Once installed windows, installed the Samsung NVMe driver and magician. Then restarted my computer and changed the boot to the 970evo and re enabled CSM. Boom mind blown I'm a noob with no experience in BOIS. So much for plug and play. Can anyone give advice on disk cloning? Thanks
le 27.05.2019 09:15
le 27.05.2019 09:15
Hello @30lucas30 and welcome to our Community.
Your mainboard offers these M2 interfaces:
le 27.05.2019 09:50
le 27.05.2019 09:50
Erm, a little bit I think, so it should support this internal storage then? Why cant I get mine to work? Thanks
le 27.05.2019 10:57
le 27.05.2019 10:57
Hello @30lucas30 ,
Yes, according to Samsung`s Data Sheet it should be compatible. You may contact their
support to get further information.
Cheers,
Luke
le 27.05.2019 12:25
le 30.05.2019 09:22
le 30.05.2019 09:22
Okay everyone, I got it sorted, had to remove my old HDD, swap bois from RST to AHCI disable CSM. Change boot to USB and install a fresh windows 10 off a stick. Once installed windows, installed the Samsung NVMe driver and magician. Then restarted my computer and changed the boot to the 970evo and re enabled CSM. Boom mind blown I'm a noob with no experience in BOIS. So much for plug and play. Can anyone give advice on disk cloning? Thanks