Hallo @Schneggerich Hardwaretests sollten eigentlich helfen, das Problem einzugrenzen. Zuvor würde ich aber den Rechner mal öffnen, und alle Kabel vom Netzteil kontrollieren, ob die (auch die einzelnen Adern) von ATX-Strom, CPU-Strom, Grafikkarte-Strom, etc. tief und fest in der Buchse am Mainboard / Grafikkarte, etc. stecken. Der CPU-Kühler muss auch fest sitzen, und an allen Befestigungspunkten korrekt montiert sein. RAM Module und Grafikkarte müssen ganz tief und korrekt im Steckplatz sitzen. Dann würde ich im BIOS die optimierten Default-Werte laden. Zuerst mal einen Speichertest, mindestens 2 Durchläufe, es dürfen keine Fehler auftreten, die gratis Version reicht. https://www.memtest86.com/ Dann mal die gesamte Festplatte einlesen, ob hier Lesefehler wegen defekten Speicherblöcken auftreten. Das kann man ua. mit HD-Tune machen, oder von Linux aus mit dd. https://www.hdtune.com/ Dann mal nur die Grafikkarte belasten und dabei die Temperatur beobachten, das könnte man mit div. 3D-Demos von Nvidia machen, oä., mit MSI Afterburner oder hwinfo die Temp. anzeigen. https://www.cpuid.com/softwares/hwmonitor.html Mehr als 85°C ist nicht gesund für die Grafikkarte auf Dauer. Übrigens auch für die CPU nicht. Beobachten ob der Lüfter sich anfängt zu drehen wenn die Temperatur steigt, und wo sich die Temperatur einpendelt. Dann die CPU testen. Dafür gäbe es zB. Prime95 im Stresstest Modus. Ebenfalls die Temperaturen überwachen. Hier werden sicher schnell mehr als 85°C erreicht. Die Lüfter für die CPU-Kühlung müssen dann mit Maximalwert laufen. Wenn die CPU-Temperatur weiter auf über 95°C steigt, würde ich den Test abbrechen, ist auf Dauer nicht gesund für die CPU. Aber das ist auch ein ziemlich extremer Stresstest, der alle CPU-Ressourcen stark auslastet. Der Test bricht automatisch ab, wenn er Rechenfehler erkennt, das darf natürlich nicht passieren. Zuletzt würde ich um das Netzteil zu testen, noch Furmark für hohe Grafikkartenlast + Prime95 Stresstest gleichzeitig laufen lassen. Hier gibt man im Task-Manager auch Prime95 eine leicht niedrigere Priorität als Normalwert, damit Furmark leicht bevorzugt bedient wird. Wenn das Netzteil überfordert wird, sollte bei dem Test der PC plötzlich ausgehen wegen Netzteil Überlast Not-Abschaltung. Wenn man die Möglichkeit hat, kann man währenddessen auch die Spannungen für 12V und 5V messen, ob die in der Toleranz von +/- 5% sind. Wenn der PC zu heiß wird, darauf achten, dass es rund um den PC genug Platz gibt, damit der die Wärme abgeben kann. Also zB. nicht in einen Kasten, oder mit Belüftungsöffnungen in Richtung Wand stellen, ohne ca. 5cm Platz zu lassen. MfG. K.B.
... View more