Over Tfamok77

Tfamok77 · ‎14.11.2024

Yeah I'm definitely not filing down screw heads. Will just buy different head on screws. Teddy

Tfamok77 · ‎14.11.2024

The M3 x 4mm screws I bought seemed to screw in easily and was a good fit. The problem seemed to be head protruded out slightly too much. Maybe by a mm. So I need a screw to fit an m.2? Teddy @daddle wrote: @Tfamok77 Corrrection: This screw is to fit a M.2 SSD. Sorry Your screw is to thick.You do need a M2 screw. Or the thread doesn't fit- he screw must be positioned very delicately to screw it in (because of the fine thread) Cheers, daddle

Tfamok77 · ‎14.11.2024

Frustration 😭😭😭 I bought the correct sized screws (screws in picture just display) and of course the screws prevent me inserting the track back in correctly. I played about with tray for 15mins trying to get it to fit but I didn't want to break the pc or new hard drive. The screws are right size/length and are countersunk but no joy. Anyone any suggestions? Help very much appreciated. Teddy @Tfamok77 wrote: Ahhh my very bad + to make it worse I already downloaded that document. Problem solved though so thank you very much indeed. Teddy @Tfamok77 wrote: Ahhh my very bad + to make it worse I already downloaded that document. Problem solved though so thank you very much indeed. Teddy

Tfamok77 · ‎12.11.2024

Ahhh my very bad + to make it worse I already downloaded that document. Problem solved though so thank you very much indeed. Teddy

Tfamok77 · ‎11.11.2024

Hello,I hope you are well. I bought a Kingston A400 960GB 2.5" SSD for my Eraser x86003 MD34496. I looked inside to base unit but I couldn't actually see any spare sata cables or an actual bay to install it so thought I would just order a 2.5" to 3.5" adaptor for the hot swap mobile rack at the front. However,upon looking inside of the mobile rack I noticed the available sata ports the 2.5" ssd will slide into in the hot sway bay are on the left side and most adaptors will leave the SSD sata ports just off centre. Can anyone recommend a compatible adaptor for the Eraser x86003 MD34496?? Sorry for such a stupid question but Ive looked everywhere including manual and I can't get the info. I'm not good at this computer stuff. Thank you for your time and help. Teddy.

Registratiedatum	‎11.11.2024 19:30
Datum laatste bezoek	‎15.11.2024 00:31
Totaal aantal geposte berichten	5

Over Tfamok77

Re: 2.5" to 3.5" SSD sata adaptor for Medion Erase...

Re: 2.5" to 3.5" SSD sata adaptor for Medion Erase...

Re: 2.5" to 3.5" SSD sata adaptor for Medion Erase...

Re: 2.5" to 3.5" SSD sata adaptor for Medion Erase...

2.5" to 3.5" SSD sata adaptor for Medion Eraser x8...

Juridische informatie

MEDION Shops

Over MEDION