Over Lucienn

Lucienn · ‎22.10.2024

what I meant by a lspci is that I used one of my ubuntu flash drives, booted on it and executed the command `lspci` in hopes that I'd see nvidia in the output, to no avail. I tried a fresh windows 11 install using a newly created partition on the same ssd and no adapters other than the intel uhd popped up in the device manager, also tried installing the drivers I got from the laptop's Medion page but as expected it didn't find the gpu. I bought the Crawler from CDiscount with a 100 bucks guaranty, they told me to they're just a reseller and I should deal with Medion. Thank you for your commitment Daddle 😄

Lucienn · ‎21.10.2024

I didn't have to touch the GPU at all, the ssd mounting space is clear of obstructions, just had to unscrew and rescrew the screw keeping it in place For the drivers part, the laptop came without an os so I installed windows 11 and all the drivers were available on the medion website I tried a clean windows 11 instalation today with no result and a lpsci on Linux just in case

Lucienn · ‎21.10.2024

The MSN is 30035598 I hope something can be done, this laptop is my main work station for uni, I need the GPU to run 3d modeling software

Lucienn · ‎21.10.2024

Thanks for the response ! I live in France The original ssd was lost to my messy brother The new one is a 1tb crucial

Lucienn · ‎21.10.2024

Hi again, support said that they won't do it if it wasn't the original ssd inside

Lucienn · ‎13.10.2024

It does but I opened it up and switched the ssd ?

Lucienn · ‎12.10.2024

Hi, My erazer e40's (MSN30035598, bought it a bit over a year ago) gpu stopped working for some reason, it does not show up in windows' device manager, I tried DDU, I also tried a lpsci on a linux bootable drive, no results. What I haven't tried is a windows hard reset. The laptop never had issues before but a few days ago it just wouldn't boot so I opened up, and pushed the battery plug into the motherboard as it seemed it came a bit loose. That did the trick, it booted again but now the fans won't stop spinning after shutting it down, they only stop when pressing the power button. I took special care that the laptop did not overheat, it was not very dusty when I opened it and I bought a stand so it could cool better. I also opened it up to add a 2TB nvme, but that was almost a year ago.

Registratiedatum	‎12.10.2024 17:25
Datum laatste bezoek	‎15.11.2024 12:49
Totaal aantal geposte berichten	7

Over Lucienn

Re: Erazer E40 GPU failure (replacement board) ?

Re: Erazer E40 GPU failure (replacement board) ?

Re: Erazer E40 GPU failure (replacement board) ?

Re: Erazer E40 GPU failure (replacement board) ?

Re: Erazer E40 GPU failure (replacement board) ?

Re: Erazer E40 GPU failure (replacement board) ?

Erazer E40 GPU failure (replacement board) ?

Juridische informatie

MEDION Shops

Over MEDION