Over LOTGS

LOTGS · ‎14.08.2022

Thank you @Sir_burp! That's done the trick for me too. I rolled the driver back, and it's still saying that I'm running the best drivers when I try to update it again, but whatever: the warning message has gone and the device is working properly now. Who'd have though it would be somethning so simple?

LOTGS · ‎14.07.2022

Thanks @Major_ToM 1.16 is the version of the Bios that I already updated to and that hasn't resolved the issue. I'm guessing that only leaves me with option 1 that you described, but that still seems to be quite a drastic and hugely inconvenient course of action. Do you know if this issue likely to cause any practical problems in future? The PC seems to be running fine at the moment... Thanks.

LOTGS · ‎12.07.2022

Thanks @daddle That's worked, I've successfully updated the Bios! The only thing now is the original problem (Medion EM2 System Firmware 113 device cannot start (code 10)) is still present. Do you happen to have any suggestions for how this could be resolved now the Bios is updated? Much appreciated!

LOTGS · ‎11.07.2022

Thanks @daddle, I'm not too knowledgable about this area of technicalities. Are there any new courses of action you can suggest to me that follow on from your information? The issue is still present. Thanks!

LOTGS · ‎13.04.2022

Hi Major ToM, Thanks for the tip. Am I right in thinking everything would then need re-installing and setting back up? It seems like quite a dramatic move when the PC actually seems to be running ok at the moment...

LOTGS · ‎12.04.2022

Hi multilaf, Thanks for the advice. I've followed the instructions on that page but unfortunately the problem hasn't been solved. The message I get in the device manager is different now though, as you can see below.

LOTGS · ‎06.04.2022

Thanks mats749, I'm a little confused: I've followed your instructions, but all that happens is I get the two Command Prompt windows that you can see in the attached images. When I press any key as it requires, the two windows close down and nothing else happens. Am I missing something? I am running WFH.BAT as administrator. Thanks.

LOTGS · ‎05.04.2022

Hi mats749, Sure. I'm not sure exactly which BIOS screen you want, so I've captured each of the main pages here. Thanks.

LOTGS · ‎01.04.2022

Hi multilaf, I have exactly the same thing as you described. No idea what it means though.

LOTGS · ‎01.04.2022

Hi mats749, Thanks. I've already done the Windows update and the device manager says that the best drivers for the firmware are already installed. But still the error message is there. Guy

LOTGS · ‎01.04.2022

Hi Mats749, The MSN number is 10024314. Excuse my inexperience, but I'm not familiar with updating firmware. I guess that's done differently from the standard Windows 11 update? I had a look in the BIOS but couldn't see anything that seemed relevant. Kind regards, Guy

LOTGS · ‎30.03.2022

Hi there, I've just been on my PCs device manager and noticed an error symbol over the Medion EM2 system firmware 113 (see picture below). I was wondering if anyone knows what this it? Should I be concerned and what could I try to fix it? The PC is an Erazer Engineer P10 and it seems to be running fine. I've tried updating the driver for that device but it hasn't remedied the issue. Thanks in advance!

Registratiedatum	‎30.03.2022 23:42
Datum laatste bezoek	‎14.08.2022 20:56
Totaal aantal geposte berichten	12

Over LOTGS

Re: EM2 system firmware 113 error

Re: EM2 system firmware 113 error

Re: EM2 system firmware 113 error

Re: EM2 system firmware 113 error

Re: EM2 system firmware 113 error

Re: EM2 system firmware 113 error

Re: EM2 system firmware 113 error

Re: EM2 system firmware 113 error

Re: EM2 system firmware 113 error

Re: EM2 system firmware 113 error

Re: EM2 system firmware 113 error

EM2 system firmware 113 error

Juridische informatie

MEDION Shops

Over MEDION