@momo1365 Hier schon mal ein Bild des MB V1.1: : MS-7077 V.1.1 Ist das dein Mainboard? Es hat 2 SATA 6 Gb/s und zwei 3 Gb/s ports. Angeblich passen nur 8 GB maximal? Aber ich denke nicht dass du Einstellungen des Proc (OC) in einem Medion Bios vornehmen kannst. Gruss, daddle Processor Support
Intel Sandy Bridge processor in the LGA1155 package
Supports 4 pin CPU Fan Pin-Header with Fan Speed Control
Chipset
Intel BD82P67 "SLH84" B2-Stepping
Memory Support
DDRIII 1066 / 1333 Mhz (8 GB Max)
2 DDRIII DIMMs (240pin / 1.5V)
Single / Dual channel mode
Network
LAN: 10/100/1000 by Intel 82579V
WLAN: ./.
IEEE1394: ./.
Audio
8 channels audio codec Realtek ALC887
Flexible 8-channel audio with jack sensing
Compliant with Azalia 1.0 Spec
IDE / Serial ATA / Floppy
Floppy: ./.
IDE: ./.
Serial ATA:
• 2 SATA 6Gb/s ports (SATA1 & SATA 2) by Intel P67 PCH
• 2 SATA 3Gb/s ports (SATA3 & SATA 4) by Intel P67 PCH
BIOS
AMI EFI APTIO core
SPI flash (32Mbit)
Connectors
Back panel:
• 1 PS/2 mouse port • 1 PS/2 keyboard port
• 4 USB 2.0 ports
• 2 USB 3.0 ports
• 1 LAN (RJ-45) jack • 5 audio jacks (flexible)
• 1 S/PDIF-Out (optical)
On-Board Pinheaders:
• 4 Serial ATA Connectors
(2x black color = SATA 6 Gb/s, 2x orange color = SATA 3 Gb/s)
• 1 Front Panel Audio Connectors (JAUD1)
• 2 Front USB Connectors
(JUSB1 - Yellow, JUSB2 - Red)
• 1 S/PDIF-Out Connector (JSPD1)
• 1 Clear CMOS Jumper (JBAT1)
• 1 BIOS Recovery Jumper (J1)
• 1 Fan Power Connector (CPUFAN)
• 1 ATX 24-Pin Power Connector (JPWR1)
• 1 ATX 4-Pin 12V Power Connector (ATX1)
Slots
1 PCIe 2.0 x16
2 PCIe 2.0 x1
... View more