About Theness

@Theness    If the  end that plugs into the PC is different, and you do find no fitting Adapter ( I guess you will find one), then cut the Plugs on the PC side (they transport for mankind harmless low voltage DC) and reconnect the fitting old plug to the new cable.   There are only two wires inside the cable, plus and minus. Do not connect the wrong wires. and check the continuity form the plugs inner contact to the wire end, the same for the outer contact. That identifies the way the current takes, On the PSU side,if the cable ist cut, measure with a multimeter the Voltage, and the multimeter tells you which wire is plus and which is minus.   On the imprint on the back of your PSU should a symbol show the polarity of the socket on your PCs side.     When cutting the plug on the PSU off  the new PSUs cable, be sure it is disconnected to the wall outlet.   Good luck, daddle ... View more