About Schele

by the way, did you try to switch the intel secure boot off in the bios? ... View more

Hi there.   first, i replaced the intel ssd with a 850 evo. before that i copied the RECOVER section to another drive, and did a complete reinstall, clean. So now the EVo is my main drive and have the recover section in a third drive. Thats one. No more BSOD.   But i do have serious network issues. The LAN en wifi seem to borrow each other names, and i get network conflicts. No idea how to solve this, other than removing the WIFI in the bios setting. All drivers are up to date, but the Medion bios isn;t.   The thing i i liked this NUC so much, i got myself a Intel I7 NUC, with intel bios. Now that is doing a lot better, very stable, and no funny issues. So i'm not sure. Since Medion is not supporting the bios like intel does, my advice would be a new clean install, and remove as much as you can in the bios settings.   sorry, can;t help you.   Best, Schele. ... View more

Hi there. Hold F1 or F2 while booting. That will get you in the bios screen. Load defaults, et voila.    Edit, ha, i see you found it. Here it worked rather well. had to reload the bios one more time since it got garbled again, but after that all is well here ?     ... View more

hi there.. by the way, are you planning to integrate the visual bios in the next update ?     Best ... View more

uh ooohh.. did run the bios update, i get CMOS setting wrong screen.  Sounds like trouble.   edit. OK, machine is dead. Only get ""CMOS settings Wrong"" screen. Is the intel F7 BIOS mode enabled to load bois from boot?   Edit 2. OK machine is alive again. Keep holding F2 when booting,  and load defaults. (or F8 till 12 while booting.. ( not sure what i tried, but it is now alive. )   Good 🙂 Ok, i see that you can now put the windows boot section in the boot menu. I assume that will solve the boot issues people had with this wonderful little baby 🙂   thxs   ps,for other users, i did a mem upgrade from 4 gb to 16 GB, makes the machine a lot more reactiv & quicker. the standard 4 gb is a bit on the (s)low side for W81 and some applications. ... View more

Hi there. Yep, that was the first trick , load default. no result.  problem was that it sometimes sees nothing, just the bios, and boots in only the bios screen, sometimes only the EUFI boot & Bios  part, and now most of the time also the windows boot part. Normaly you have & set  that boot option in your bios setting, but not in the Medion bios.   I must say, after this trouble wit booting i replaced the Intel SSD with a 500 GB Samsung 850. Since i thought it was a disc failure, or problem. I cloned the D recovery part to a USB WD ext hd, so it was no problem to have it do a recovery session, and install  W81 on the Samsung.   as in today, it boots most of the time normal with the windows boot section, but not always. Random. I can't find why...   I will try your new bios, and keep you updated. thxs for that one 🙂 ... View more

yep. Same machine here, same problem. Hold F8 while booting.  you get a screen that says EUFI or Windows. choose windows, reboot et voila, deine machine is wieder froh !.   and if you hold F8 and only see EUFI, do a cold reboot, and try again.   best ... View more

hi there...  Same question here. could you please update the bios of this NUC?  I had many problems with booting, the machine always prefers random to boot from  the ( UEFI )  recovery-boot section, so i need to boot with F8 to select the windows boot section. No clue why.   Please update bios?   thanxs ... View more