Informationen zu Jeffherckens

Hi @daddle , I connected the pc to my TV via hdmi.  I first tested the hmdi port on the video card --> no result.  I tested the hmdi port on the main board --> no result.  I can confirm that there are no beeping noises.  ... Mehr anzeigen

Here are the pictures of the disconnected cables    ... Mehr anzeigen

Hello @daddle , Unfortunately I don't have an old monitor.  I tried pressing the del key when booting up but still no display.  However, when I boot up, the screen seems to briefly pop out or it's sleeping mode just to say that it doesn't receive video input. Clearly some kind of signal is getting to the monitor.  ... Mehr anzeigen

Hello @Carsten_Tech , I'm not sure how to do switch the monitor setting.  I can confirm however that whenever I plug the monitor with hmdi into another laptop, there is no issue.  I also tried to connect a different monitor to the medion pc, but it had the same problem.  ... Mehr anzeigen

Ok I can't upload picture because the file size is too big.  There are 2 unconnected cables coming from the graphics card. One has 6 pins, the other has 2.  Then there's another unconnected cable coming from the motherboard (to the top left of the big blue fan). That cable has 4 pins.  ... Mehr anzeigen

Hi @daddle ! Thanks for replying so quickly.  I removed the black plug from the hmdi port on the main board and plugged in the hmdi cable of my monitor. I booted up the pc. But I'm still not getting an image. The monitor doesn't seem to reverse a video signal.  As a side note: there are no peripheral USB devices plugged in, no ethernet. Only the hmdi and the power cable.  I should probably mention that I had removed the black plug before I booted up the pc the first time. I had put it back however when I plugged the hdmi in the graphic card port.  Another odd thing to me: there are a couple of unconnected cables in the pc. I'll take a picture.  ... Mehr anzeigen