Over Ectheliontnacil

Ectheliontnacil · ‎27.09.2021

Thanks for your reply! Actually, I managed to resolve the issue myself (kind of). Turns out that my GPU was attached too tightly and made contact with some other parts, which caused a very loud clicking sound. Because this occurs even at very low GPU fan speeds, I initially thought the sound had to come from somewhere else. Additionally, the PSU fan can be annoyingly loud (as well as my disk lol), but as far as I know, there is nothing I can do about that. In case anyone else is experiencing a similar issue, here is a helpful video on the GPU fan problem. Solution for the Zotac 3060ti shroud noise - YouTube

Ectheliontnacil · ‎24.09.2021

Hello all, I am increasingly bothered by the noise produced by my engineer p10 pc. As soon as I start it, it is already annoyingly loud, cpu and gpu temperatures can be 30-40 degrees and there's still a VERY audible buzzing sound. I actually suspected my GPU fans or the two fans in the PC case, but even if you turn them off completely, the PC is very loud. As far as I can tell, the noise comes from either the disk or the power supply fan (or is there anything else that could cause excessive noise?). I was wondering if anyone else had a similar problem and if there are any suggestions as to what I could do to fix this. Thanks in advance!

Registratiedatum	‎24.09.2021 15:04
Datum laatste bezoek	‎27.09.2021 15:02
Totaal aantal geposte berichten	2
Totaal aantal ontvangen kudos	3

Over Ectheliontnacil

Re: ERAZER Engineer P10 is too loud

ERAZER Engineer P10 is too loud

Juridische informatie

MEDION Shops

Over MEDION