cancel
Showing results for 
Search instead for 
Did you mean: 

What do the error codes mean for the MD 18600 Robot Vacuum Cleaner?

Question

What do the error codes mean for the MD 18600 Robot Vacuum Cleaner?

 


Answer

Please refer to the following table for error codes and solutions:

 

Error code Meaning Solution
E01 Left wheel is blocked. Remedy the fault on the wheels.
E02 Right wheel is blocked. Remedy the fault on the wheels.
E05 Sensor fault Move the robot vacuum cleaner to a brighter place.
Clean the sensor.
E06 Appliance is blocked. Move the robot vacuum cleaner to a different place.
E08 The side brushes do not move. Remove the brushes, clean them thoroughly and then reattach.
After replacing the side brushes, check that the drive shaft does not slip.1
E10 On / Off switch is set to 0.
The battery block is flat.
Set the On / Off switch to I.
Leave the battery block to charge fully for approx. 4.5 hours.

 

1To check whether it is possibly due to the replaced brushes, please mount the previous brushes and check the function again.
  If possible, only use original accessories

 

You can also find further support here:

Manual Robot Vacuum Cleaner MD 18600 (de, es, fr, nl, it)

Video Tutorial: Probleme mit Deinem Saugroboter? (German language)

 

If the solutions given are not successful, please contact our support.


Version history
Last update:
‎27.09.2024 09:35
Updated by:
Community Manager
Labels (3)
Contributors