Over Bodgekin

Hi @johninstalbans ,    I think it might not be a power problem or your BIOS version, but rather the type of BIOS that causes the problem. Most - if not all modern cards require an UEFI BIOS to work, while your system (considering the BIOS version is 8 years old) will most likely still have a legacy BIOS.  Generally speaking, if your system originally came with Windows 7, it will probably have such a legacy BIOS, if it came with Windows 8 or higher, it wil likely be a UEFI BIOS.    If you indeed have a legacy BIOS, I'm afraid there is no easy solution for it without replacing a lot of parts :(.   ... Meer weergeven

Hi @TheGr8Destructo ,    Is a version of Intel Rapid Start or Rapid Storage installed on your system?  If so, try turning off Link power managment, I believe it is under the "Performance"  tab. I think it is some sort of energy saving option causing either the harddrive or the dvd drive to go into some sort of standby state and spinning up again if I remember correctly.      ... Meer weergeven

Hi @Simjon ,    I can't find any info on your system, I dont think M7613 is a correct modelnumber, do you have the MD or MSN number?  If it is a notebook with a removable battery, you could try to remove both the battery and the charger, then press the powerbutton a few times.  After that, reconnect the battery and charger, and try again.      ... Meer weergeven

Hi @Acelsp ,    Then I don't see why it would not be possible to boot from the M.2 SSD, you should be able to install Windows on it using the Media creation tool.     ... Meer weergeven

Hi @natswright,    I don't know any other sources I'm afraid, but perhaps an external keyboard could be a workaround if you can't find a replacement?     ... Meer weergeven

Hi @Chacka,    I'm not sure on the RAM, but I'm afraid you can't upgrade the CPU, an i5-3317U has a BGA socket, which means it is soldered to the mainboard.   ... Meer weergeven

Hi @Acelsp ,    Which E4251 do you have exactly? And are you sure that the harddrive you have currently is on the motherboard? The models I could find all seem to already have an M.2 SSD, and no integrated harddrive.   ... Meer weergeven

Hi @Makembill,    The recovery partition will contain the original Windows 7 installation when the PC was originally delivered with Windows 7.  You can make your own recovery media for Windows 10 using the Media Creation Tool. With this you can make an installation USB stick or DVD and install Windows 10 from scratch.  ... Meer weergeven

Hi @roesl,    As has been mentionned a few times here already, it is NOT possible to install any apps yourself on a Medion TV. Your best bet would be to connect an external device like a chromecast for this.      ... Meer weergeven

Hi @Cauptain,    You should be able to enter the UEFI using the DEL-key, but you would need to restart Windows to be able to (Shutting the PC down and starting it again might not work due to fastboot).  Alternatively you could also try to go to the start menu, press your shift-key, keep it pressed, and then choose restart, all the while keeping your shift-key pressed. This would boot Windows into recovery mode, and under Advanced options you should be able to find an option to change UEFI firmware settings, which would reboot the PC to the UEFI.      ... Meer weergeven

Hi @JohnJones,    Are you sure your system supports up to 64 GB? According to this site the X7851 has 2 memory slots, and for 64 GB you'd need 4. It might be a different version of the X7851 though, what is your MSN number? I've not been able to find any instructional video's on changing the memory of this model so far :(, but it should be DDR4 - 2400Mhz.     ... Meer weergeven

Hi @EvilRaceHorse,    Is your USB stick UEFI or legacy boot enabled? If it is Legacy, try looking in your BIOS if there is a Legacy / CSM / other OS option or something like it. If the stick should be UEFI, then I don't see why it wouldn't boot, but I don't have any experience with Linux.      ... Meer weergeven

Hi @Harun,    Sounds like the UEFI does not find any bootable device and because of this tries to boot from a network. Entering the UEFI with F2 should work though.  That you can't boot from the SSD before installing Windows is normal though, since there is nothing on it to boot yet. Have you tried booting from a Windows 10 installation USB stick or DVD?      ... Meer weergeven

Hi @guyhaj,    What PN do you mean? It will not be possible to install apps on these TV's, the only way to achieve this is to connect an external device like a Chromecast or something like that I guess.      ... Meer weergeven

Hi @musMiro,    Was the notebook working fine up until the beer-incident? If so, I think something short-circuited somewhere as a result of the spill. If it where just a sensor giving false information, I would expect your software to show these wrong values as well since they get the info from the same sensor.  I think the best thing to do is to have a technician have a look at it, but I'm afraid it is very likely that the motherboard is broken :(.      ... Meer weergeven

Hi @Paft,    The post on the German forums is about the update to version 1709, not 1809, but as far as I can determine with Google translate the problems seem similar. If I understand it correctly the solution in that case was to reinstall Windows using the Media Creation Tool. Maybe this works for you as well?      ... Meer weergeven

Hi @lostprophet,    Have you tried turning it off by keeping the powerbutton pressed for a long time, and then starting again? If it still does nothing after that I dont think there is any more you can try.    ... Meer weergeven

Hi @Jayceemcg,    What is the modelnumber or MSN number of the PC itself? And did you get the update from the Medion site? It seems weird to me that such a gaming motherboard would be delivered with a Dual core CPU? Is your powersupply sufficient to support the new CPU? Also when looking for the error code I see a lot of topics concerning memory as well, perhaps your memory is not compatible with the new motherboard?         ... Meer weergeven

Hi @klept0,    That means we can rule out any problem with the app. The strange thing is that the configuration through the app requires a Wifi connection between the speaker and the tablet / smartphone with the app. Apparently that does work. According to the manual you can reset the speaker by switching the main power off for a few seconds, but I suspect you already tried that? And have you tried updating the firmware of the speaker through the app (Though I'm not sure if that works when it is not connected to a network)? Otherwise I think there might be something wrong with the speaker, especially since you tried it on 2 different networks.       ... Meer weergeven

Hi @Desblb,    It is not possible to have a negative amount of sectors, so I dont think the displayed info is correct. I dont know what would cause this, but if your harddrive functions as intended I wouldnt pay to much attention to it.      ... Meer weergeven

Hi @nitefox75,    It looks to me like only the keyboard should light up? I think the touchpad and the displaylid just have bright blue paint, no backlight.      ... Meer weergeven

Hi @klept0,    Does your modem or router support WPS? If so, perhaps you can connect the speaker using the WPS button on the rear directly to the modem / router, without having to use an app.      ... Meer weergeven

Hi @Desblb,    I dont expect this to be a hardware issue, I think it is either a driver issue, or a Windows update that messed something up, did you install any major Windows updates just before the issues started? I'd try updating the Chipset drivers and if that does not work reinstalling the control center.     ... Meer weergeven

Hi @tazplan,     I don't think there is a way to controll the physical button for the Cooler Boost with software, it seems to be MSI technology.  See here for someone trying to do the same thing. As I understand it the cooler boost just makes your fans run at maximum RPM, so you should be able to reach the same effect with some fancontroller software, if you can find one that recognises your fans.      ... Meer weergeven

Hi @Rimmer,    The error messages all point towards a problem with the BIOS not saving its settings, which usually is caused by an empty BIOS battery. You still receive the same errors after replacing the battery? Did you go into the BIOS and load the optimized defaults after replacing the battery? Other than that all I can think of is either the replacement battery is also dead, or there is a problem with the motherboard.      ... Meer weergeven