Deze website gebruikt cookies. Klik op Accepteren om akkoord te gaan met het cookie-gebruik van onze website, zoals wordt beschreven in ons Privacy-beleid. Klik op Voorkeuren om uw cookie-instellingen aan te passen.
Accepteren
Afwijzen
Voorkeuren
40282leden
140502berichten
Help
annuleren
Suggesties inschakelen
Met de functie voor automatische suggesties kunt u uw zoekresultaten snel verfijnen doordat mogelijke overeenkomsten wordt voorgesteld terwijl u typt.
Resultaten voor 
Zoek in plaats daarvan naar 
Bedoelde u: 

Over aagbemuko

sinds ‎19.11.2022
‎20.11.2022
aagbemuko
Beginner
Openbare statistieken
Registratiedatum ‎19.11.2022 20:27
Datum laatste bezoek ‎20.11.2022 20:06
Totaal aantal geposte berichten 3
Totaal aantal ontvangen kudos 2

Re: Boot Menu not Loading with New Erazer Hunter X...

door in ERAZER Gaming
‎19.11.2022 22:18
2 Kudos
‎19.11.2022 22:18
2 Kudos
Hello,   I found the solution. I found out I needed to insert the display cable in a specific port -- the DP port (not the HDMI which I was using before). There was an instruction at the back panel, but it was in German, so just translated it. After that, everything seems fine.   It turns out its a display port issue.   Best regards, Ade ... Meer weergeven

Re: Boot Menu not Loading with New Erazer Hunter X...

door in ERAZER Gaming
‎19.11.2022 21:54
‎19.11.2022 21:54
Hello Fishtown,   Thank you very much for your answer. Indeed, this is what I have tried to do except I am misunderstanding the procedure from the manual that you mentioned because I also have read the manual.   Basically, what I have done is shutdown the PC as normal. Then, press the on/off button and almost immediately, I press and hold the Del key. Windows just boots to the logon screen (ignoring the pressed and held Del key which I do for more than a minute).   Not sure what am doing wrong.   Ade ... Meer weergeven

Boot Menu not Loading with New Erazer Hunter X20 P...

door in ERAZER Gaming
‎19.11.2022 20:35
‎19.11.2022 20:35
Hello,   I just got a new Medion Erazer X20 Hunter PC (MD 35357) and for the last 24 hours I have been trying to go to the boot menu set up. I have tried F2/F12/Del and even tried to boot from Windows Advanced Start up (based on some answers on this forum). But every time after using for example the Windows Advanced Start up and press restart, the display goes completely blank. However, the PC is on with the LEDs and all fans and the cooler working, but no signal is received by the display. The same applies to any of the function keys.   I have tried to press the power on/off button to force shut down and press again and the system boots fine to windows if I don't press any keyboard characters.   What could be the problem? I have tried for 24 hours to no avail. ... Meer weergeven
Kudos van
Alles weergeven
Hier kunnen gebruikers hun ervaringen en kennis met elkaar delen.
 

Juridische informatie

Cookie-melding
Privacy verklaring
Richtlijnen voor gebruik
Impressum
 

MEDION Shops

Online Shop
Zoek reserve-onderdelen
 
 
 

Over MEDION

Contact
Service
Over ons
International
Carrière

Award 1
Award 2
Award 3