À propos de Sallen1973

Sallen1973 · ‎23.03.2022

Seeing as the laptop is at a repair centre, has been stripped down, taken apart and inspected, I think the warranty is now void.

Sallen1973 · ‎28.02.2022

Had the same problem with my Deputy erazer P10. The Intel 10300h is a infamously hot running processor especially when it tries to turbo up to its 4.5 MHz max clock speed. The only way around the overheating problem on this design flawed laptop is to either switch off the turbo mode of the processor or cap the max clock speed. I found capping the Max turbo speed to between 3.6 to 3.8 MHz the best way with the Freeware program Throttlestop, depending on what games your running. Turning the turbo mode off entirely and keeping it at its base 2.5 GHz clock speed, kept the laptop running at much lower temperatures and had very acceptable performance on some older and newer titles.

Sallen1973 · ‎24.02.2022

Does anyone know where I can get a electrical schematic for the above laptop with a K15C motherboard? My laptop is at a professional repair centre which has identified the fault as a defective voltage regulator chip. Unfortunately there are no numbers on the chip which make the component impossible to identify and thus making it unable for the laptop to be repaired. I'm pulling my hair out with Medion customer service, they keep fobbing me off with nice words but very little action. My laptop repair centre has ever known a situation such as this, they cant find a schematic anywhere, what about the EU law on right to repair? This should be a easy repair but thanks to poor customer support I'm left with a broken laptop.

Date d'inscription	‎23.01.2021 18:52
Date de dernière visite	‎16.06.2022 03:58
Total de messages envoyés	3

À propos de Sallen1973

Re: Need electrical Schematic for Erazer deputy P1...

Re: Guide: Your overheating Deputy P10 :p

Need electrical Schematic for Erazer deputy P10 MS...

Informations juridiques

MEDION Online

À propos de la MEDION