Hi everyone, I have solved the issue. There were 2 issues. First, I removed my CPU and noticed that the socket had 3 or 4 bent pins. I used a small needle to bend them back into place. After that the I had no more "usable" ram indication. However the 2x4gb RAMs did not work. Only 2x2gb rams, or 2gb+4gb. This was beacuse my 4gb RAMs were 1600mhz, and I have been informed that the MS-7708 Motherboard cannot support anything other than 1333Mhz. I had a friend sell me his 2x8GB rams with 1333Mhz (even though I know my motherboard can only go up to 8gb total, but i eventually will change my motherboard, so I already have 16GB there to use) and now it states a full 8GB usable. Thanks for your help everyone
... Afficher plus