annuleren
Resultaten voor 
Zoek in plaats daarvan naar 
Bedoelde u: 

Medion TV Wireless display

11 ANTWOORDEN 11
Fvogels
New Voice
Bericht 1 van 12
33.801 Weergaven
Bericht 1 van 12
33.801 Weergaven

Medion TV Wireless display

Hi everybody,

I recently bought a Medion TV. The TV should have the so called "wireless display" function. However I walked into the following problem:

I do find the Wireless Display option in my input list, but as soon as I select it, the TV loses the internet connection. As a result my phone can't find the TV to cast to. 

To be sure of my conclusion I even used the Medion Wireless remote app with which I selected the Wireless Display input. As soon as I did that, I couldn't use the Wireless remote app anymore (which indicates that the internet connection of the TV is lost, as the Wireless remote app is based on an internet connection). So it definitely is the internet connection of the TV that is the issue. 

I do have to mention that I have never had difficulties with the internet connection of the TV when using Netflix or YouTube, the problem only pops up when I want to use the Wireless Display function. 

 

Is there anybody that knows the problem and/or knows a solution to the problem??

 

Thanks in advance!!!

 

Vogels

11 ANTWOORDEN 11
Gehringer
Retired
Bericht 2 van 12
31.076 Weergaven
Bericht 2 van 12
31.076 Weergaven

Hi @Fvogels and welcome to the FORUM!

 

Can you please provide the MSN number of your TV?

It is an eight-digits number printed in the label behind your TV.

It should probably start by 300 or 500

 

In the meanwhile, because your wireless connection works fine with other apps, I think it may be a matter of configuration.

 

Have you already tried to restore your TV to its factory settings (aka first time configuration)?

 

Regards,

Gehringer

Fvogels
New Voice
Bericht 3 van 12
31.068 Weergaven
Bericht 3 van 12
31.068 Weergaven

Hi @Gehringer, thanks for your reaction.

 

No, I have not tried to reset the TV to its factory settings, I could try that.

However I would prefer to wait  for your possible solution because I will lose all my settings :).

 

Because I mounted my TV to the wall, and a metal component of that mount is in front of the 8 digit code I can't give you my MSN code. I do however have the type code for you: MEDION LIFE P13284/MD31384.

 

I hope you know what the problem could be! Thanks in advance.

 

Vogels

daddle
Superuser
Bericht 4 van 12
31.064 Weergaven
Bericht 4 van 12
31.064 Weergaven

@Fvogels 

 

The MSN number you also can find on the box, in which the TV was packed. You should keep the box if possible anyway for later transport  by moving, or sending it to a repair place, eg Medion Service.

 

daddle

Gehringer
Retired
Bericht 5 van 12
30.834 Weergaven
Bericht 5 van 12
30.834 Weergaven

Hi @Fvogels ,

 

well, unfortunately in your case, the first option would be to perform a reset to the factory settings.

 

Regards,

Gehringer

PieterPAM
New Voice
Bericht 6 van 12
29.594 Weergaven
Bericht 6 van 12
29.594 Weergaven

Hi,

I have the same problem with my MD32060 (50” tv screen).

I already have rest the tv to factory settings after updating the tv to the latest firmware.

 

hope that this will be solved soon...

 

GreetZ,

Pieter

PieterPAM
New Voice
Bericht 7 van 12
29.593 Weergaven
Bericht 7 van 12
29.593 Weergaven

Hi all,

I found that I also have the problem that the information sticker of the TV is located right under the location where the wall mound base must be attached to the TV.

 

Suggestion to Medion:

Place the information sticker not on the location where the wall mount should be placed...

BeardGuy
Beginner
Bericht 8 van 12
28.667 Weergaven
Bericht 8 van 12
28.667 Weergaven

I have the same problem, but with a brand new, just released Medion Life x16595 (MD 32195).  
It’s really really irritating, it seems like it’s for no reason at all, I’ve looked through all the settings and can’t find anything!


Please Medion, please fix this!

PieterPAM
New Voice
Bericht 9 van 12
28.608 Weergaven
Bericht 9 van 12
28.608 Weergaven

Hi BeardGuy,

I found the answer in the manual that it only works for Android devices and not for Apple devices....

so it seems there is not much we can do...

 

GreetZ,

Pieter

gescat
Beginner
Bericht 10 van 12
22.614 Weergaven
Bericht 10 van 12
22.614 Weergaven

Which was the solution to make this work?

11 ANTWOORDEN 11