How to enable XMP on MEDION B560H6-EM2 (U3E1)

[chefsahlam]

Recently upgraded my ram to 3200 mhz. However they only run at 2400 mhz atm. Could anyone tell me how to reach the bios and where to enable XMP?

Best regards

[EastClintwood]

Hello @chefsahlam, and welcome to the community.

To get into the bios please follow these steps:
1. turn off the computer and wait for 5 seconds.
2. turn on the computer and immediately press Esc repeatedly until the start menu opens.
3. press F10 to open the BIOS setup utility.

You will then find the XMP settings here:
Advanced Memory Settings > Extreme Memory Profile

Greetings,
EastClintwood

[chefsahlam]

I had to hold "tab delete" whilst starting. Could however not find any tab called "Advanced Memory Settings". I did find a tab called advanced but there was nothing about memory settings in there or under any other tab. Got any other tips?

Best regards

[Edman]

Correct, nowhere to find to enable XMP or set AI overclock tuner to DOCP in Bios.
Bios ver: 2.21.1278

B560H6-EM2

[Major_ToM]

Hi @Edman  & @chefsahlam ,

this sounds kind of strange, because we already shipped PC units carrying the predecessor´s B460H4 equipped with DDR4-SDRAM modules (PC4-25600 / 3200 MHz), so if your modules are okay, the should run with more then 2400 MHz.

The current Bios version of the ECS B4650h6-EM2 should be 1.16 and can be downloaded here.

Please remind, that for any errors, caused by the execution of this update, we don´ t accept any responsibility for damage or lost of data.

Cheers

Major ToM