cancel
Showing results for 
Search instead for 
Did you mean: 

FAQs

Sort by:
Disconnect the webstick, uninstall the ALDI TALK connection wizard, restart the computer, run the fix and reinstall the webstick. Everything should then work again.
View full article
First find the desired station and save it according to the instructions. Then switch to FM mode for at least three seconds, after which the station should be permanently stored.
View full article
Clouding or the torch effect occurs on televisions with side LED backlighting when the light-conducting plastic panel becomes uneven due to overheating. Avoid heat sources such as heaters or direct sunlight and ensure sufficient air circulation.
View full article
Check blocked ventilation slots and clean them regularly. If the notebook still gets warm, close unnecessary programmes and manage autostart programmes via the task manager to reduce the system load.
View full article
The overheating protection is activated if there is not enough cooling air in the appliance. This is a safety function and the appliance can be used again after about an hour.
View full article
Install an update that optimises the sound settings. Download the file, unzip it, run the IFU_XE.exe and restart the PC after a power reset.
View full article
Download the original software from the MEDION website, unzip the file on a USB stick and follow the instructions in the installation guide.
View full article
The soap dispenser is versatile and can dispense disinfectant as well as soap. It is also suitable for washing-up liquid, hand lotion and shampoo.
View full article
If the MEDION Life+ app reports that the user does not exist, use the Forgot Password function on the MEDION website to receive a new password by e-mail.
View full article
Go to the device settings, select Connections and activate Mobile Hotspot and Tethering. Optionally, you can set a name and password for the network, after which you can connect other devices via Wi-Fi.
View full article
To connect an Android device to a PC, activate the Media Transfer Protocol (MTP) via the drop-down menu after connecting the USB cable. If it does not work, try reconnecting the cable or restarting the device.
View full article
To activate the hotspot on your iPhone, open the Settings app and select personal hotspot. Switch on the function and your hotspot is ready to use.
View full article
Without a front panel, the door of an undercounter dishwasher will not close properly and may spring out of its anchoring. It should therefore be closed carefully in this case.
View full article
Make sure that the crockery has enough space and that the spray arms can work unhindered to ensure thorough cleaning. To achieve optimum results, the machine must be set and maintained correctly.
View full article
Rust stains are caused by salt or rusty basket areas. A short programme without dishes after refilling with salt and sealing rusty basket areas will help to prevent this.
View full article
Unpleasant odours can be caused by a lack of cleaning or long standing times with leftover food. Regular cleaning of the interior and the use of the hottest programme with special cleaning agents can help.
View full article
XMP memory can be operated without an XMP profile, but then uses standard JEDEC settings with potentially lower performance. To be able to use the memory with XMP profile, both the mainboard and CPU must be XMP-capable.
View full article
Water can leak out of the sides of household appliances if the door seal is damaged or dirty. Heating the warped rubber with a hair dryer and cleaning the seals can solve the problem.
View full article
Order a suitable remote control via the MEDION Service Shop using your MSN number or model name.
View full article
Check the socket if the dishwasher does not switch on. If the display works but the programme does not start, check the door seal and clean the sieves and nozzles.
View full article
Top Contributors