annuleren
Resultaten voor 
Zoek in plaats daarvan naar 
Bedoelde u: 

FAQs

Sorteren op:
You can change the amount of water dispensed in the Life+ app.
Volledig artikel weergeven
Additional cleaning agents can damage the robot vacuum cleaner.
Volledig artikel weergeven
Clean the sensor surfaces with a dry cloth.
Volledig artikel weergeven
The childproof lock on your washer-dryer is activated.
Volledig artikel weergeven
The appliance is not drawing water, the water pressure is too low or the aquastop has been triggered.
Volledig artikel weergeven
Information on the maximum memory expansion, the front pin assignment and M.2 slots.
Volledig artikel weergeven
Here you will find detailed technical information about the mainboard
Volledig artikel weergeven
Deactivate the scrubbing mode of your robot vacuum cleaner.
Volledig artikel weergeven
Here you can read how to set up a No Go Zone.
Volledig artikel weergeven
Answers to frequently asked questions about your Android TV.
Volledig artikel weergeven
The contacts of the dirty water tank are dirty, clean them carefully.
Volledig artikel weergeven
The PIN protection must be deactivated before using.
Volledig artikel weergeven
The seam width is fixed by the needles and cannot be changed.
Volledig artikel weergeven
This FAQ tells you how to proceed.
Volledig artikel weergeven
Log in with the same access data.
Volledig artikel weergeven
Please note the following table.
Volledig artikel weergeven
Tips for changing a WLAN system to a new one.
Volledig artikel weergeven
Open the maintenance door on the underside of the Robot vacuum Cleaner.
Volledig artikel weergeven
Due to the routine clockwise rotation of the suction cups, it happens that the units themselves cover the virtual wall.
Volledig artikel weergeven
Answers to the most frequently asked questions about the robot vacuum cleaners.
Volledig artikel weergeven
Topbijdragers