annuler
Affichage des résultats de 
Rechercher plutôt 
Vouliez-vous dire : 

FAQs

Trier par :
You can change the amount of water dispensed in the Life+ app.
Afficher l'article complet
Additional cleaning agents can damage the robot vacuum cleaner.
Afficher l'article complet
Clean the sensor surfaces with a dry cloth.
Afficher l'article complet
The childproof lock on your washer-dryer is activated.
Afficher l'article complet
The appliance is not drawing water, the water pressure is too low or the aquastop has been triggered.
Afficher l'article complet
Information on the maximum memory expansion, the front pin assignment and M.2 slots.
Afficher l'article complet
Here you will find detailed technical information about the mainboard
Afficher l'article complet
Deactivate the scrubbing mode of your robot vacuum cleaner.
Afficher l'article complet
Here you can read how to set up a No Go Zone.
Afficher l'article complet
Answers to frequently asked questions about your Android TV.
Afficher l'article complet
The contacts of the dirty water tank are dirty, clean them carefully.
Afficher l'article complet
The PIN protection must be deactivated before using.
Afficher l'article complet
The seam width is fixed by the needles and cannot be changed.
Afficher l'article complet
This FAQ tells you how to proceed.
Afficher l'article complet
Log in with the same access data.
Afficher l'article complet
Please note the following table.
Afficher l'article complet
Tips for changing a WLAN system to a new one.
Afficher l'article complet
Open the maintenance door on the underside of the Robot vacuum Cleaner.
Afficher l'article complet
Due to the routine clockwise rotation of the suction cups, it happens that the units themselves cover the virtual wall.
Afficher l'article complet
Answers to the most frequently asked questions about the robot vacuum cleaners.
Afficher l'article complet
Principaux contributeurs