cancel
Showing results for 
Search instead for 
Did you mean: 

FAQs

Sort by:
Check if the microphone is connected to the correct input.
View full article
For some error symptoms there are currently no universal answers.
View full article
The function of infrared connections requires unrestricted visual contact.
View full article
You can test with a digital camera if the remote control emits a signal.
View full article
First, attach your device to a different power outlet and see if this results in the fuse tripping.
View full article
If your memory card is no longer recognized, it needs to be repaired or replaced.
View full article
Check the primary side power supply and, if present, the on / off switch of the power supply.
View full article
There may be a cable break, one of the most common signs of wear on electrical equipment.
View full article
Due to the routine clockwise rotation of the vacuum cleaner, it happens that the device themselve cover the virtual wall.
View full article
The alarm center receives firmware updates via OTA (Over the Air).
View full article
Here you will find information and packaging instructions for MEDION products in case of service.
View full article
You can find useful tips on cleaning your robot vacuum cleaner here.
View full article
Clean the sensor surfaces with a dry cloth.
View full article
The sensors are probably dirty or corroded. Here we explain how to proceed.
View full article
Here you can read how to set up a No Go Zone.
View full article
This FAQ explains how to save a map.
View full article
Deactivate the scrubbing mode of your robot vacuum cleaner.
View full article
In this FAQ you will find useful information about your robot vacuum cleaner.
View full article
Please note the following table.
View full article
Answers to common questions about set-up and use.
View full article
Top Contributors