Ce site Internet utilise les Cookies. Cliquez sur Accepter pour accepter l'utilisation des cookies sur notre site Internet, comme décrit dans notre Politique de confidentialité. Cliquez sur Préférences pour personnaliser la configuration de vos cookies.
La fonction de suggestion automatique permet d'affiner rapidement votre recherche en suggérant des correspondances possibles au fur et à mesure de la frappe.
A slow or crashing system may be due to outdated software or full hard drives. Update regularly and use tools such as the MEDION Service App to detect errors.
Use the MSInfo32 program, which is started by entering ‘msinfo32’ in the Run dialogue (Windows key + r). There you will find the mainboard designation under ‘System overview’ behind ‘BaseBoard product’.
Due to their mechanical components, hard drives can make noises. If unusual noises occur, it is recommended to check the status of the hard drive using system commands and, if necessary, to use the manufacturer's diagnostic software.
Open the Start menu and click on ‘Restart’ while holding down the ‘Shift’ key. Then select ‘Troubleshooting’, ‘Advanced options’ and then ‘UEFI firmware settings’ to go directly to the BIOS.
Activate RAID mode in the BIOS and create the desired array. Then install Windows with the required drivers. Back up your data beforehand, as it may be lost.
Either look in the system settings under ‘Info’ or open the command prompt and enter the command ‘systeminfo’. Both methods will show you the original installation date.
Loosen the screws and then carefully separate the plastic clips that connect the housing halves. Please note that modifications to the device may limit the warranty, as only the delivery condition is fully guaranteed.
This may be caused by a swollen battery, which poses a fire risk. MEDION advises you not to use or charge the device and to prepare it safely for disposal.
If two-step verification is enabled and no alternative verification method is available, Microsoft cannot help. Without this verification, you should try the sign-in utility or fill out the Microsoft account recovery form to get feedback.
Check the Device Manager (Windows key + X) under ‘Security devices’ for the TPM version. If no TPM is displayed, it may need to be activated in the BIOS.
To find the BitLocker key, log in to your Microsoft account and manage the keys for the corresponding device. On modern notebooks, the key is automatically saved in the Microsoft account.
Check blocked ventilation slots and clean them regularly. If the notebook still gets warm, close unnecessary programmes and manage autostart programmes via the task manager to reduce the system load.
XMP memory can be operated without an XMP profile, but then uses standard JEDEC settings with potentially lower performance. To be able to use the memory with XMP profile, both the mainboard and CPU must be XMP-capable.
To adjust the brightness, search for the corresponding settings on the device or in the software. This may vary depending on the type of device (monitor, PC, smartphone, TV).
Windows 11 requires at least a 1 GHz processor with 2 cores, 4 GB RAM, 64 GB storage space, TPM 2.0 and DirectX 12-capable graphics. Internet and a Microsoft account are required to install Windows 11 Home.
(en-gb) ▼ 
Klick hier, um diese Seite auf Deutsch zu lesen
Click here to read this page in English
Cliquez ici pour lire cette page en français
Klik hier om deze pagina in het Nederlands te lezen
