annuler
Affichage des résultats de 
Rechercher plutôt 
Vouliez-vous dire : 

FAQs

Trier par :
Check the power supply and install all the latest software updates. If necessary, uninstall problematic USB device drivers and restart.
Afficher l'article complet
To upgrade your RAM, know the memory generation, voltage, number of pins and clock rate. Switch off the computer and disconnect it from the power supply before installing the RAM.
Afficher l'article complet
Each appliance has a type plate with MSN / MD number. Depending on the appliance type, this can be found on the underside, rear, inside or on the packaging.
Afficher l'article complet
Check the HDMI cable and the input source on the TV. For high-resolution signals, use an HDMI cable from standard 2.0.
Afficher l'article complet
Check the connection and try different USB sticks. A sufficient power supply to the USB port is also required.
Afficher l'article complet
The ERAZER ControlCenter software can be used to activate or deactivate the USB ports in sleep mode or when switched off, even without a connected power supply unit.
Afficher l'article complet
Bluetooth pairing problems can be caused by device settings or app authorisations. Check all devices and apps involved to resolve connection problems.
Afficher l'article complet
The NUM Lock function is probably active. Switch it off by pressing the SHIFT + FN + NUM Lock, FN + Ins or FN + NUM buttons simultaneously.
Afficher l'article complet
Install the software patch by downloading the file, unzipping it and executing it with administrator rights to activate the CoPilot button.
Afficher l'article complet
A slow or crashing system may be due to outdated software or full hard drives. Update regularly and use tools such as the MEDION Service App to detect errors.
Afficher l'article complet
Use the MSInfo32 program, which is started by entering ‘msinfo32’ in the Run dialogue (Windows key + r). There you will find the mainboard designation under ‘System overview’ behind ‘BaseBoard product’.
Afficher l'article complet
Due to their mechanical components, hard drives can make noises. If unusual noises occur, it is recommended to check the status of the hard drive using system commands and, if necessary, to use the manufacturer's diagnostic software.
Afficher l'article complet
Open the Start menu and click on ‘Restart’ while holding down the ‘Shift’ key. Then select ‘Troubleshooting’, ‘Advanced options’ and then ‘UEFI firmware settings’ to go directly to the BIOS.
Afficher l'article complet
Activate RAID mode in the BIOS and create the desired array. Then install Windows with the required drivers. Back up your data beforehand, as it may be lost.
Afficher l'article complet
Open the Windows settings with the key combination ‘Windows’ + ‘i’, go to ‘Accounts’ and then to ‘Login options’.
Afficher l'article complet
Either look in the system settings under ‘Info’ or open the command prompt and enter the command ‘systeminfo’. Both methods will show you the original installation date.
Afficher l'article complet
Loosen the screws and then carefully separate the plastic clips that connect the housing halves. Please note that modifications to the device may limit the warranty, as only the delivery condition is fully guaranteed.
Afficher l'article complet
This may be caused by a swollen battery, which poses a fire risk. MEDION advises you not to use or charge the device and to prepare it safely for disposal.
Afficher l'article complet
If two-step verification is enabled and no alternative verification method is available, Microsoft cannot help. Without this verification, you should try the sign-in utility or fill out the Microsoft account recovery form to get feedback.
Afficher l'article complet
Check the Device Manager (Windows key + X) under ‘Security devices’ for the TPM version. If no TPM is displayed, it may need to be activated in the BIOS.
Afficher l'article complet
Principaux contributeurs