annuleren
Resultaten voor 
Zoek in plaats daarvan naar 
Bedoelde u: 

FAQs

Sorteren op:
Here you can read how to set up a No Go Zone.
Volledig artikel weergeven
The contacts of the dirty water tank are dirty, clean them carefully.
Volledig artikel weergeven
The seam width is fixed by the needles and cannot be changed.
Volledig artikel weergeven
Log in with the same access data.
Volledig artikel weergeven
Please note the following table.
Volledig artikel weergeven
Tips for changing a WLAN system to a new one.
Volledig artikel weergeven
Open the maintenance door on the underside of the Robot vacuum Cleaner.
Volledig artikel weergeven
Due to the routine clockwise rotation of the suction cups, it happens that the units themselves cover the virtual wall.
Volledig artikel weergeven
Answers to the most frequently asked questions about the robot vacuum cleaners.
Volledig artikel weergeven
In this FAQ we explain how to clean the impeller of your robot vacuum cleaner.
Volledig artikel weergeven
To set the start time, press the PLAN button on the remote control.
Volledig artikel weergeven
In this FAQ we explain the most common faults of your robot vacuum cleaner.
Volledig artikel weergeven
By using a light barrier, which creates a virtual wall via infrared signal.
Volledig artikel weergeven
Fill the water tank to 50% and shake to the right and left.
Volledig artikel weergeven
Tips and tricks for the sustainable descaling of your coffee maker.
Volledig artikel weergeven
The different models have the same structural components.
Volledig artikel weergeven
Reach into the opening and pull a little harder to change the filter.
Volledig artikel weergeven
The UV-C lamp only becomes active when you press the safety switch and at the same time apply pressure to the rollers.
Volledig artikel weergeven
For some error symptoms there are currently no universal answers.
Volledig artikel weergeven
FAQs on handling the Robot Vacuum Cleaner.
Volledig artikel weergeven
Topbijdragers