annuler
Affichage des résultats de 
Rechercher plutôt 
Vouliez-vous dire : 

FAQs

Trier par :
Here you can read how to set up a No Go Zone.
Afficher l'article complet
The contacts of the dirty water tank are dirty, clean them carefully.
Afficher l'article complet
The seam width is fixed by the needles and cannot be changed.
Afficher l'article complet
Log in with the same access data.
Afficher l'article complet
Please note the following table.
Afficher l'article complet
Tips for changing a WLAN system to a new one.
Afficher l'article complet
Open the maintenance door on the underside of the Robot vacuum Cleaner.
Afficher l'article complet
Due to the routine clockwise rotation of the suction cups, it happens that the units themselves cover the virtual wall.
Afficher l'article complet
Answers to the most frequently asked questions about the robot vacuum cleaners.
Afficher l'article complet
In this FAQ we explain how to clean the impeller of your robot vacuum cleaner.
Afficher l'article complet
To set the start time, press the PLAN button on the remote control.
Afficher l'article complet
In this FAQ we explain the most common faults of your robot vacuum cleaner.
Afficher l'article complet
By using a light barrier, which creates a virtual wall via infrared signal.
Afficher l'article complet
Fill the water tank to 50% and shake to the right and left.
Afficher l'article complet
Tips and tricks for the sustainable descaling of your coffee maker.
Afficher l'article complet
The different models have the same structural components.
Afficher l'article complet
Reach into the opening and pull a little harder to change the filter.
Afficher l'article complet
The UV-C lamp only becomes active when you press the safety switch and at the same time apply pressure to the rollers.
Afficher l'article complet
For some error symptoms there are currently no universal answers.
Afficher l'article complet
FAQs on handling the Robot Vacuum Cleaner.
Afficher l'article complet
Principaux contributeurs