annuleren
Resultaten voor 
Zoek in plaats daarvan naar 
Bedoelde u: 

How do I set a No Go / No Wipe Zone on my robot vacuum cleaner?

How do I set a No Go / No Wipe Zone on my robot vacuum cleaner?

Robot vacuum cleaner MEDION X20 SW+ (MD 11415), X40 SW (MD 20040) and X50 SW+ (MD 20004)

  • MEDION X20 SW+ (MD 11415)

  • Follow these steps to set up a No Go / No Wipe Zone:
      1. Open the app.
      2. Select No Go Zones from the robot control menu (on the right-hand side of the screen).
      3. Click on Do not vacuum / do not wipe or on No wipe zone.

    If you click on one of them, a box appears on the map (if necessary, zoom out to see the whole map). The zone can then be resized as desired.

    ⚠️Note⚠️ The No Go Zone cannot be placed near the charging station and must not be smaller than 0.8 x 0.8 metres.

  • MEDION X40 SW (MD 20040) and X50 SW+ (MD 20004)

  • Follow these steps to set up a No Go / No Wipe Zone:
      1. Open the app.
      2. Select Virtual Wall from the robot control menu (at the top of the screen).
      3. Click on No Go Zone or on No wipe zone.

    By clicking on one of them, a field appears on the map (if necessary, zoom out to see the entire map). The zone can then be resized as desired and can also be named.

    ⚠️Note⚠️ The No Go Zone cannot be placed near the charging station and must not be smaller than 1.0 x 1.0 metre.


Versiegeschiedenis
laatst bijgewerkt:
‎30.10.2023 06:15
Bijgewerkt door:
Labels (2)
Medewerkers