Medio erazer x15809 md 61598 - bios

[justincr83]

Hey, i'm new here, hello to everyone!

long story short, i bought a medion erazer x15809 with no display. it proved that the display was faulty. Previous it was to a computer shop where they messed up the bios. When computer starts it shows a different logo (mechrevo)

i am sure they messed up bios as it had flux on the eeprom ic....

can anyone provide me a copy of the original bios?

or some info where i can find and download the original bios?

MSN: 3002 7171

erazer x15809 md 61598

machine kinda works now but it can't install rtx drivers, nvidia cannot find suitable hardware....

thanks a million!!

[Fishtown]

Hello @justincr83 and welcome
which bios version is installed there?
An RXT 2070 is installed, you can find the drivers on the medion service page:

https://www.medion.com/gb/service/product-detail/30027171

bye Fishtown

[justincr83]

I don’t know which bios version is installed, but i can look. Anyway, it say mechrevo for manufacturer and startup logo also say mechrevo which is wrong. As i said someone before has messed with bios…

it looks like bith mechrevo and medion share the same motherboard, so it’s possible to swap bioses, but i need medion one. 
laptop has rtx2070 installed on motherboard and i can confirm from gpu die engravings.

i have all the tools and experience to pull out the bios ic and flash original bios but i don’t have it….

i did try all nvidia deivers but same result. Gpu is seen ans microsoft basic display adapter…

thanks!

[justincr83]

Here are some pictures : bios and startup screen

 

 

 
Admin Edit:
Serial number visible in original picture; please remove & upload again.

[justincr83]

Anyone?

judging by the fact the bios is different, gpu id may be different, and windows can’t detect it as an rtx 2070. This will cause nvidia driver to not recognize the core bios and provide drivers. 

[Fishtown]

Hello @justincr83 

even if the BIOS is different, the graphics should be recognized.
Try the CPU-Z program and look at the graphic information there.

bye Fishtown

edit:your pictures are not yet visible to us and have yet to be approved

[justincr83]

I tried gpuZ and it reports as microsoft basic display adapter, no memory size or brand. I can see gpu and memory speed…

indeed is a problem with gpu, but i need to be sure if it’s software (bios) related before i go further with any hardware repairs…

[justincr83]

this is a copy of bios info:
System Information

System Time

System Date

BIOS Version

EC Version

Build Date and Time

Manufacturer Name

Product Name

Serial Number

Asset Tag

UUID Number

Ethernet MAC Address

Processor

Processor Type

Processor Speed

Total Memory

Memory Frequency

ME Information

ME FW Version

ME Firmware SKU

[22:05:09]

[Fri 08/25/20231

N. 1.53

2.04.09

06/21/2019 11:28:10

MECHREVO

X9Ti-R Series GK7CPOS

419086H31980450274

Standard

2E7BA5FC22BFE911AD6B9839A2A62000

BO:25:AA:2F:9C:BC

Intel (R) Core(TM) 17-9750H CPU @ 2. 6OGHZ

2600 MHZ

8192 MB

3200 MHZ

0.0.0.0

Unidentified

Version 2.20.1271. Copyright (C) 2019 American

[Fishtown]

Hello @justincr83 ,

it was a used model. I think someone has a Mechrevo board (Tongfang GK7CPOS) in the case
x15809 (tongfang GK5CQ7Z) installed, this one has 2x 8192MB. You only see 1x 8GB.

bye Fishtown

[justincr83]

i only have ONE stick of ram installed! it's normal to see in bios only 8gb!

I am asking for BIOS bin/rom file so i can flash the original medion erazer bios, i am not asking for anything else!