Erazer x7830

[shaman101]

Greetings and hi all!

I have an erazer x7830 notebook. When first i brought home and powered on, it took me in the bios, so i changed some values in bios, and after that it will not go through the "medion logo".

I've already tried resetting the cmos battery, i've disconnected the battery from the motherboard.I give her a new thermal paste, already taken out the cpu and put it back in. I tried to clean the ports if there is a short circuit. I've reseated the mxm videocard also. It has no ssd/hdd, but the rams are in their slot, but not on the rear side where the cpu and heatsinks are, rather at the front, and i dont know how to disconnect the keyboard to reach the ramslots. I've tried to unscrew the keyboard holding screws on the back, but unfortunately there are more screws holding the keyboard. I think i have to dissassembly the whole system.

Any ideas what gone wrong ? The laptop is in new condition by the way.

Anyone has a service document for this modell, i would really appreciate it!

[shaman101]

No there is no beeps.

There is no ssd/hdd inside. Or maybe there is an msata ssd somewhere installed, because it is mentioned here in the post by Razz.

[RAZZ]

hi @shaman101 

Please find a link to a generic manual of the MEDION ERAZER X7830 (MD 99454) the unit as explained is from 2014 so a service manual maybe difficult to find.

If your unit has no drives installed then it will only boot to BIOS, also it originally came with Windows 8 so please check the compatibility of  the Windows version you have been trying to boot from USB. 

X7830 

Thanks