topic Re: X5361 G support samsung 970evo plus? in ERAZER Gaming

X5361 G support samsung 970evo plus?

30lucas30 — Sun, 26 May 2019 13:39:20 GMT

ive been having abit of trouble and dont know too much im affarid, ive got a Erazer X5361 G with i think a B250H4-EM mother board, i see what looks like the right M.2 connection plug but the samsung drivers dont detect it and neither does my bois by the looks of it. any ideas on how i can get it to work. thanks

Re: X5361 G support samsung 970evo plus?

Luke — Mon, 27 May 2019 08:15:22 GMT

Hello @30lucas30 and welcome to our Community.

Your mainboard offers these M2 interfaces:

Re: X5361 G support samsung 970evo plus?

30lucas30 — Mon, 27 May 2019 08:50:50 GMT

Erm, a little bit I think, so it should support this internal storage then? Why cant I get mine to work? Thanks

Re: X5361 G support samsung 970evo plus?

Luke — Mon, 27 May 2019 09:57:47 GMT

Hello @30lucas30 ,

Yes, according to Samsung`s Data Sheet it should be compatible. You may contact their

support to get further information.

Cheers,

Luke

Re: X5361 G support samsung 970evo plus?

30lucas30 — Mon, 27 May 2019 11:25:45 GMT

@Luke thanks i was installing hardwear in wrong connection, i can now see the device in disk management but still cant install drivers do i need to change any settings?

thanks

Re: X5361 G support samsung 970evo plus?

30lucas30 — Thu, 30 May 2019 08:22:27 GMT

Okay everyone, I got it sorted, had to remove my old HDD, swap bois from RST to AHCI disable CSM. Change boot to USB and install a fresh windows 10 off a stick. Once installed windows, installed the Samsung NVMe driver and magician. Then restarted my computer and changed the boot to the 970evo and re enabled CSM. Boom mind blown I'm a noob with no experience in BOIS. So much for plug and play. Can anyone give advice on disk cloning? Thanks