topic Re: No Signal on screenpo in Desktop PC / All-In-One

No Signal on screenpo

Nekoriran — Wed, 21 Sep 2016 20:24:35 GMT

I started my medion desktop MEDION AKOYA P7385 D (MD 8883) up and I got only NO SIGNAL message on screen.

I have tested it with an other monitor, sam result. I pluged power cable out, pressen on botton for 15 sec and powerd on again, same result. I have got battery bios battery for 5 min out and again in, same result.

When it was working after setting on fan began to work for a while and stopped and after that logon page on screen but fan keeps working with loudly sound and I get NO signa on screen. What's the problem with my computer? Please help

Re: No Signal on screenpo

Bodgekin — Thu, 22 Sep 2016 13:40:41 GMT

Hi @Nekoriran,

No signal usually points to a problem with the monitor, cable, or inside the PC with the motherboard or graphicscard. When you tested the other monitor, did you also use a different cable? If so, I'm afraid that either your motherboard or graphicscard is defective :(.

Re: No Signal on screenpo

Nekoriran — Mon, 26 Sep 2016 22:01:30 GMT

Thanks a lot for your advise, I have replaced grafic card and my computer works good again.

Re: No Signal on screenpo

Bodgekin — Tue, 04 Oct 2016 09:19:14 GMT

Your welcome :), glad to hear your PC is fixed!

Re: No Signal on screenpo

Faz — Mon, 29 May 2017 12:17:49 GMT

I too have the the problem. I have tested the monitor and cable on another PC, it worked. I have tried another working monitor on the Medion PC and it did not work, i got the same error on a blue rectangle box, "No Signal". Now here i the odd one. I have just powered off and on and this time i got the single bleep as it started up. This time it went throught boot up, F11 screen etc and launched windows 10. Is obviously and intermittant fault, but how do i find out what?