Thema "Re: AKOYA S2000 D ( Firmware - Bios )" in Desktop PC / All-In-One

AKOYA S2000 D ( Firmware - Bios )

Via — Tue, 07 Apr 2015 12:06:36 GMT

Hallo,

bitte mal die neue Firmware (Bios) ...

wie lange dauert das, und wann kann ich die laden ??

bei Intel ist schon verfügbar

BIOS Update [WYLPT10H.86A] ---

3/24/2015

0037
(Latest)

BIOS

https://downloadcenter.intel.com/product/76975/Intel-NUC-Board-D54250WYB

Gruß

Re: AKOYA S2000 D ( Firmware - Bios )

Via — Thu, 09 Apr 2015 05:38:23 GMT

Ach passt schon ...

Geht zurück das Teil ... NP

Support = schlecht

Re: AKOYA S2000 D ( Firmware - Bios )

Via — Thu, 09 Apr 2015 05:40:35 GMT

Original NUC = Visual Bios

https://www.google.de/search?q=intel+nuc++bios&source=lnms&tbm=isch&sa=X&ei=qRAmVeuqOMHTaJfmgaAG&ved=0CAgQ_AUoAg&biw=1906&bih=930

Re: AKOYA S2000 D ( Firmware - Bios )

Major_ToM — Fri, 10 Apr 2015 12:41:16 GMT

Hallo Via,

uns liegt aktuell die Bios Version 1.17 vor, die gegenwärtig in der Testphase ist und aller Voraussicht nach in der kommenden KW freigegeben wird. Wir bitten um Verstaändnis, dass wir die bei Intel veröffentlichte Version nicht blindlinks freigeben.

Es wird unsererseits darüber hinaus davon abgeraten, die Original-Version von Intel zuverwenden, da diese auf dem MEDION AKOYA S2000 nicht lauffähig ist.

Zusatzinfo: Mit der Version 1.17 wird die Lüftergeschwindigkeit nach dem Aufwachen aus dem S3 optimiert.

Gruß

Major_Tom

Re: AKOYA S2000 D ( Firmware - Bios )

Schele — Sun, 10 May 2015 19:35:43 GMT

hi there... Same question here. could you please update the bios of this NUC? I had many problems with booting, the machine always prefers random to boot from the ( UEFI ) recovery-boot section, so i need to boot with F8 to select the windows boot section.

No clue why.

Please update bios?

thanxs

Re: AKOYA S2000 D ( Firmware - Bios )

Major_ToM — Tue, 12 May 2015 06:08:04 GMT

Hi Schele,

in SWM configuration the unit always boots into Windows, so we guess, some basic settings has been "missadjusted". Ever tried to load Bios-defaults?

Tested Bios-update (V 1.17) is now available: HERE.

+++Installation notes+++
1. Unzip the downloaded file into a created folder on your harddisk.

2. Run the file WFLASH64.BAT from Windows™ surface.

3. If a "WFlash Warning" appears, press OK to execute the update.

Re: AKOYA S2000 D ( Firmware - Bios )

Schele — Tue, 12 May 2015 13:57:36 GMT

Hi there. Yep, that was the first trick , load default. no result. problem was that it sometimes sees nothing, just the bios, and boots in only the bios screen, sometimes only the EUFI boot & Bios part, and now most of the time also the windows boot part.

Normaly you have & set that boot option in your bios setting, but not in the Medion bios.

I must say, after this trouble wit booting i replaced the Intel SSD with a 500 GB Samsung 850. Since i thought it was a disc failure, or problem.

I cloned the D recovery part to a USB WD ext hd, so it was no problem to have it do a recovery session, and install W81 on the Samsung.

as in today, it boots most of the time normal with the windows boot section, but not always. Random. I can't find why...

I will try your new bios, and keep you updated. thxs for that one 🙂

Re: AKOYA S2000 D ( Firmware - Bios )

Schele — Tue, 12 May 2015 15:31:48 GMT

uh ooohh.. did run the bios update, i get CMOS setting wrong screen. Sounds like trouble.

edit. OK, machine is dead. Only get ""CMOS settings Wrong"" screen. Is the intel F7 BIOS mode enabled to load bois from boot?

Edit 2. OK machine is alive again. Keep holding F2 when booting, and load defaults. (or F8 till 12 while booting.. ( not sure what i tried, but it is now alive. )

Good 🙂 Ok, i see that you can now put the windows boot section in the boot menu. I assume that will solve the boot issues people had with this wonderful little baby 🙂

thxs

ps,for other users, i did a mem upgrade from 4 gb to 16 GB, makes the machine a lot more reactiv & quicker. the standard 4 gb is a bit on the (s)low side for W81 and some applications.

Re: AKOYA S2000 D ( Firmware - Bios )

Schele — Sat, 23 May 2015 15:21:21 GMT

hi there.. by the way, are you planning to integrate the visual bios in the next update ?

Best

Re: AKOYA S2000 D ( Firmware - Bios )

ReinhardF — Sat, 20 Jun 2015 06:10:09 GMT

I did pretty much have and run into the same problem. So now I am sitting here with that "CMOS Settings Wrong" on my screen.

Please tell me what you did to get over that screen.

Reinhard

Re: AKOYA S2000 D ( Firmware - Bios )

ReinhardF — Sat, 20 Jun 2015 06:38:11 GMT

... just got over it. I had to press F1 or F2 and got into the bios. Then I had to set date and time and got started into windows.

Uff.

Now I have to see if the boot problem got solved with the new bios firmware from medion/intel.

ReinhardF

Re: AKOYA S2000 D ( Firmware - Bios )

Schele — Mon, 06 Jul 2015 10:06:07 GMT

Hi there. Hold F1 or F2 while booting. That will get you in the bios screen.

Load defaults, et voila.

Edit, ha, i see you found it. Here it worked rather well. had to reload the bios one more time since it got garbled again, but after that all is well here ?

Re: AKOYA S2000 D ( Firmware - Bios )

jenswehner — Sun, 19 Jul 2015 17:08:13 GMT

Hi Schele,

did you already solved your boot problem? I'm very interested in your solution.

I got a big bad boot problem too and I try to solve it since 6 weeks:

I added a Samsung SSD 850 EVO and the S2000 D worked fine for two weeks. Then the misery begun, I got "blue screens of death". The blue screens returned every time more quickly, at last only 1-2 minutes after successful boot of Windows. But nearly always the system only started into BIOS. At these times the Intel SSD was "not present" in BIOS SATA configuration, but the 850 EVO. I had to remove the power cable to get a proper boot into Windows. So I thought, the Intel SSD could fail.

But surface test and S.M.A.R.T. parameters of the Intel SSD were always ok and never there were data loss!

Medion support adviced me to recover Windows, but it's hard to save my personal files when system always hangs and reboots...

After reading many forums I found a description that there could be a problem with Intel Rapid Storage driver on Intel NUCs. So I uninstalled it and Windows replaced it with its own driver.

The blue screens of death did not return and the S2000 D worked very well - but only for one week! Then the blue screens returned like the first time.

So I decided to remove the 850 EVO to test if the 850 EVO could cause the problems.

Now same procedure: The blue screens of death did not return and the S2000 D worked very well - but only for one week again! Then the blue screens returned like before.

Now I'm about to try to save my files and recover Windows, but I'm in fear it will not work too.

Jens

Re: AKOYA S2000 D ( Firmware - Bios )

Schele — Wed, 12 Aug 2015 11:47:45 GMT

Hi there.

first, i replaced the intel ssd with a 850 evo. before that i copied the RECOVER section to another drive, and did a complete reinstall, clean.

So now the EVo is my main drive and have the recover section in a third drive. Thats one. No more BSOD.

But i do have serious network issues. The LAN en wifi seem to borrow each other names, and i get network conflicts.

No idea how to solve this, other than removing the WIFI in the bios setting. All drivers are up to date, but the Medion bios isn;t.

The thing i i liked this NUC so much, i got myself a Intel I7 NUC, with intel bios. Now that is doing a lot better, very stable, and no funny issues. So i'm not sure. Since Medion is not supporting the bios like intel does, my advice would be a new clean install, and remove as much as you can in the bios settings.

sorry, can;t help you.

Best, Schele.

Re: AKOYA S2000 D ( Firmware - Bios )

Schele — Wed, 12 Aug 2015 12:07:51 GMT

by the way, did you try to switch the intel secure boot off in the bios?